Pengaruh Penambahan Fin Pada Sudu Terhadap Cut In Speed Turbin Angin Savonius Tipe L

Deny Prabowo, Danar Susilo Wijayanto, Indah Widiastuti

Sari


This research aims to analyze the influence of additioning fin on blade of  the cut in speed by a savonius wind turbine type L with variation of wind speed. This research used a  savonius wind turbine type L with a rotor diameter of 1.1 m and a rotor height of 1.4 m. The method used is the experimental method by varying the addition of the fin on blade and the wind speed. Variables taken in this research are wind speed, variation of additioning fin, and cut in speed by wind turbine. Variations of additioning fin are without fin, 1 fin, 2 fin, 3 fin, 4 fin. Testing tools using anemometer. The results of the research was found that the additioning fin affect the cut in speed with the number of fin in the blade is linearly result in increasing ot the cut in speed. The lowest cut in speed is 2 m/s achieved the addition of 4 fin on the blade.

Teks Lengkap:

PDF

Referensi


Abdullah Al-Faruk., Sharifian,A. (2017) Flow Field and Performance Study of Vertical Axis Savonius type SST Wind Turbine. 1st International Conference on Energy and Power, ICEP2016, 14-16 December 2016, RMIT University, Melbourne, Australia Energy Procedia 110 (2017) 235 – 242 doi: 10.1016/j.egypro.2017.03.133

Akwa, J V., H.A. Vielmo, & A.P. Petry. (2012). A Review on the Performance of Savonius Wind Turbines. Renewable and Sustainable Energy Riviews, 16, 3054-3064.

Ali, H.A. (2013), Ekperimental Comparasion Study for Savonius Wind Turbine of Two & There Blades at Low Wind Speed, Internasional Journal of Modern Research IJMER., 3, 2978-2986.

Faqihuddin, M. F., Nizam, M., Danardono, D., & Prija, D. (2014). Karakteristik Model Turbin Angin Untwisted Blade dengan Menggunakan Tipe Airfoil Nrel S833 pada Kecepatan Angin Rendah. Jurnal MEKANIKA Volume 12 Nomor 2, Maret 2014 hal., 84–88

Frederikus Wenehenubun, Saputra,A., Sutanto, H. (2015). An Experimental Study on The Performance of Savonius Wind Turbines Related with the Number of Blades. 2nd International Conference on Sustainable Energy Engineering and Application, ICSEEA 2014 Energy Procedia 68 (2015) 297 – 304 doi: 10.1016/j.egypro.2015.03.259

Hasan, O. D. S., Hantoro, R., & Nugroho, G. (2013) Studi Eksperimental Vertical Axis Wind Turbine Tipe Savonius dengan Variasi Jumlah Fin pada Sudu. Jurnal Teknik POMITS, 2(2), 350–355.

Kamal, Faizul M. (2008) Aerodynamics Characteristics of A Stationary Five Bladed Vertical Axis Vane Wind Turbine. Journal of Mechanical Engineering, ME39 (2), 95-99.

Mahmoud, N H., El-Haroun, A.A., E. Wahba, Nasef, M.H. (2012) An Experimental Study on Improvement of Savonius Rotor Performance. Alexandria Engineering Journal, 51 (1), 19-25 http://dx.doi.org/10.1016/j.aej.2012.07.003

Sugiyono, Anindhita, Adiarso. (2016) Outlook Energi Indonesia 2016. Jakarta: Pusat Teknologi Sumber Daya Energi dan Industri Kimia (PTSEIK-BPPT). ISBN 978-602-74702-0-0 (www.bppt.go.id)

Widiastuti, Indah & Wijayanto, Danar Susilo. (2017) Developing a Hybrid Solar/Wind Powered Drip Irrigation System for Dragon Fruit Yield. The 1st Annual Applied Science and Engineering Conference (AASEC 2016) Bandung. IOP Sciece Publishing. http://iopscience.iop.org/article/10.108


Refbacks

  • Saat ini tidak ada refbacks.


Jurnal Mekanika dan Sistem Termal (ISSN : 2527-3841 ; e-ISSN : 2527-4910) diterbitkan oleh Universitas Janabadra dan telah terindeks oleh : Google Scholar

View My Stats

 Free counters!