BERBAGAI METODE KONVERSI SAMPAH PLASTIK MENJADI BAHAN BAKAR MINYAK

Untoro Budi Surono

Sari


ABSTRACT

The use of plastic and goods made of plastic have been rising in day to day. Increasing use of plastics is a consequence of the development of technology, industry and population. On one hand, the invention of plastic has a remarkable positive impact, because it has many advantages  compared to other materials. But on the other hand, the plastic waste has negative impact that too worried, so its solutions need to be looked for.  One of the alternative handling of plastic waste that currently extensively researched and developed is converting plastic waste into fuel. Converting plastic waste into fuel oil can be done with cracking process. There are three kinds of process that is hydro cracking, thermal cracking and catalytic cracking. Fuel oil produced from the cracking of plastic waste depending on the plastic type, cracking process used , catalyst type, pyrolisis temperature and condenser temperature.

Keyword: plastic, fuel, hydrocracking, thermal cracking,  catalytic cracking

Teks Lengkap:

PDF

Referensi


DAFTAR PUSTAKA

Budiyantoro, C.,2010, Thermoplastik dalam Industri, Teknika Media, Surakarta

Das, S. dan Pande, S., 2007, Pyrolysis and Catalytic Cracking of Municipal Plastic Waste for Recovery of Gasoline Range Hydrocarbons, Thesis, Chemical Engineering Department National Institute of Technology Rourkela

Kumar S., Panda, A.K., dan Singh, R.K., 2011, A Review on Tertiary Recycling of High-Density Polyethylene to Fuel, Resources, Conservation and Recycling Vol. 55 893– 910

Kurniawan, A., 2012, Mengenal Kode Kemasan Plastik yang Aman dan Tidak http://ngeblogging.wordpress. com/2012/06/14/mengenal-kode-kemasan-plastik-yang-aman-dan-tidak/, 1 Maret 2013

Osueke dan Ofundu, 2011, Conversion of Waste Plastics (Polyethylene) to Fuel by Means of Pyrolysis, (IJAEST) International Journal of Advanced Engineering Sciences and Technologies, Vol. No. 4, Issue No. 1, 021 – 024

Pahlevi, M.R., 2012, Sampah Plastik (file:///I:/Artikel%20plastic%20to%20oil/twit-sampah-plastik.html)

Panda, A.K., 2011, Studies on Process Optimization for Production of Liquid Fuels from Waste Plastics, Thesis, Chemical Engineering Department National Institute of Technology Rourkela

Sahwan, F.L., Martono, D.H., Wahyono, S., Wisoyodharmo, L.A., 2005, Sistem Pengolahan Limbah Plastik di Indonesia, Jurnal Teknik Lingkungan BPPT 6 (1), halaman 311 – 318

Tamilkolundu, S. dan Murugesan, C., 2012, The Evaluation of blend of Waste Plastic Oil-Diesel fuel for use as alternate fuel for transportation, 2nd International Conference on Chemical, Ecology and Environmental Sciences (ICCEES'2012) Singapore April 28-29, 2012

Tubnonghee. R., Sanongraj, S., Sanongraj, W., 2010, Comparative Characteristics of Derived Plastic Oil and Commercial Diesel Oil, The 8th Asian-Pacific Regional Conference on Practical Environmental Technologies (APRC2010), Ubon Ratchathani University, Ubonratchathani, Thailand

UNEP (United Nations Environment Programme), 2009, Converting Waste Plastics Into a Resource, Division of Technology, Industry and Economics International Environmental Technology Centre, Osaka/Shiga

Sarker, M., Rashid, M.M., Rahman, M.S., dan Molla, M., 2012, Envirnmentally Harmful Low Density Waste Plastic Conversion into Kerosene Grade Fuel, Journal of Environmental Protection, 2012, 3, 700 – 708.

Bajus, M. dan Hájeková, E., 2010, Thermal Cracking of The Model Seven Components Mixed Plastics into Oils/Waxes, Petroleum & Coal 52 (3) 164-172, Slovak University of Technology, Bratislava, Slovakia.

Borsodi, N., Miskolczi, N., Angyal, A., Bartha, L., Kohán, J., dan Lengyel, A., 2011, Hydrocarbons obtained by pyrolysis of contaminated waste plastics, 45th International Petroleum Conference, Bratislava, Slovak Republic

Narayana, V.I. dan Mojeswararao, D., 2012, Experimental Study on The Performance of C.I Diesel Engine Using Plastic Pyrolysis Oil Blends with Pure Diesel, International Journal of Engineering Research & Technology (IJERT) Vol. 1 Issue 6, Andhrapradesh

Guntur, R., Kumar, D. dan Reddy, V.K., 2011, Experimental Evaluation of A Diesel Engine with Blends of Diesel-Plastic Pyrolysis Oil, International Journal of Engineering Science and Technology (IJEST) Vol. 3 No. 6.

Rodiansono, 2005, Aktivitas Katalis NiMo/Zeolit dan NiMo/Zeolit-Nb2O5 untuk Reaksi Hidrorengkah Sampah Plastik Polipropilena Menjadi Fraksi Bensin, Thesis Ilmu Kimia Universitas Gadjah Mada, Yogyakarta

Nurcahyo, I.F., 2005, Uji aktivitas dan regenerasi katalis NiPd(4:1)/Zeolit alam aktif untuk hidrorengkah sampah plastik polipropilena menjadi fraksi bensin dengan sistem semi alir, Thesis Ilmu Kimia Universitas Gadjah Mada, Yogyakarta

Daryoso, K., Wahyuni, S. dan Saputro, S.H., 2012, Uji Aktivitas Katalis Ni-Mo/Zeolit pada Reaksi Hidrorengkah Fraksi Sampah Plastik (Polietilen), Indonesian Journal of Chemical Science 1 (1), Universitas Negeri Semarang


Refbacks

  • Saat ini tidak ada refbacks.