PENGARUH VARIASI UNJUK DERAJAT PENGAPIAN TERHADAP KERJA MESIN

Syahril Machmud, Untoro Budi Surono, Leydon Sitorus

Sari


ABSTRACT

This research aims to determine the influence of variations in the degree ignition, the engine performance, which is related to the power and torque of the 4 stroke petrol engine, use premium fuel with different speeds (rpm). In experiments used engine test bed, where the machine is placed on a pad that then engine output shaft connected to shaft  dinotester and parameters measured in this study is Torque and Power.  Magnets are used in the study is a magnet with a standard ignition, the ignition magnet with advanced degrees 3 ° and 6 ° from the point of default. The research results are achieved by the advanced degree ignition 6 ° from the point of default, the value of the maximum torque of 7.90 Nm, the engine speed betwen 6000 – 6500 rpm, the resulting maximum power of 7.3 hp at 7796 rpm engine speed.

Keywords : Degree Ignition, Torque, Power.


Teks Lengkap:

PDF

Referensi


DAFTAR PUSTAKA

Arends, H. Bareenschot., 1980. Motor Bensin, Erlangga, Jakarta

Dwi Krisbiantoro., 2009, ,Pengaruh Penggunaan CDI Variable dan Variasi derajat Pengapian Terhadap Unjuk kerja mesin Honda Kharisma Dengan 2 Busi., Jurnal Skripsi Institut Teknologi Sepuluh Nopember., Surabaya.,

Heywood, J.B., 1998, Internal Combustion Engine Fundamentals, Mc Graw Hill Int., New York

Philip Kristanto. , Willyanto. , Djoko Wahyudi., April 2001, Pengaruh Perubahan Pemajuan Waktu penyalaan Terhadap Motor Dual Fuel (Bensin-BBG) , Jurnal Teknik Mesin Vol. 3, No.1 : 1 – 6., Universitas Kristen Petra.

Soenarta N., Furuhama S., 2002, Motor Serba Guna, Pradnya Paramita, Jakarta.

Arismunandar., 1980. Penggerak Mula Motor BakarTorak, ITB, Bandung


Refbacks

  • Saat ini tidak ada refbacks.